Convoy C8+ Tactical Thrower Flashlight with SFT 40 LED, 5000K CCT, 2000 Lumens, 750 Meter Throw, 12 Mode Groups, Up To 8 Modes Per Group, Tail Switch
Please read the entire listing before buying and if you have any questions, contact me before buying.
I will answer your question(s) as quickly as possible.
Item Description
The Convoy C8+ with the Luminus SFT40 LED with 5000K CCT and up to 2000 Lumens, is an affordable yet powerful, versatile, throwy, multipurpose flashlight.
Powered by an included rechargeable 18650 battery, the C8+ can give you many hours of illumination from a single charge.
Designed with a throwy beam, with a large hotspot and lots of spill, the C8+ is useful indoors or out. It will be right at home in your survival kit, backpack, or to keep in your car glove box or shop tool box. The C8+ is also great for camping, backpacking, fishing and hunting.
The C8+ user interface features 12 programmable lighting Mode Groups with up to 8 modes per group. You can easily customize your C8+ modes/output to meet your needs and situation.
Features
· Medium Sized Thrower Flashlight
· Up to 11 hours runtime in lowest mode
· IPX4 Waterproof
· Uses an included 18650 Rechargeable Li-ion battery
· Durable aerospace grade 6061 grade aluminum alloy body
· Reverse clicky mechanical tail switch
· Automatic Stepdown: Turbo mode steps down to High mode automatically to prevent overheating.
· Electronic reverse polarity protection from improper battery installation
· Temperature regulation protection
· Mode Memory. The flashlight remembers the last light mode used
Specifications
· Luminus SFT40 LED
· Up To 2000 lumens
· 5000K CCT
· Smooth Reflector for More Throw
· Up To 750 Meters Beam Throw Range
· Voltage: 2.7 - 3.1 Volts
· IPX4 Waterproof Rating
· Weight: 6.9 ounces (with battery)
· Length: 5.6 Inches
· Head Diameter: 1.75 Inches
· Body Diameter: 1 Inch
Package Contents
- Convoy C8+ Flashlight
- 18650 Battery
- 1 Bay 18650 Battery Charger with USB A to Micro USB Cable
Convoy S2+ 12 Mode Group Instructions
1. To Turn On: Full click the tail switch. The flashlight turns on at the last brightness level used. This includes all normal and special modes including Strobe, Biking and Battery Check. So if you want to have your C8+ turn on in Strobe mode, turn it off when in Strobe mode.
2. To Turn Off: Full click the tail switch.
3. To Advance Through Modes: Half click the switch until you reach the desired mode. The C8+ switch only works in one direction.
4. Default Mode Group: (Group 1) modes are: 0.1%, 1%, 10%, 35%, 100%, strobe, biking, battery-check)
5. Physical Flashlight Lockout: Untwist the flashlight base to break battery circuit.
Mode Group Configuration
1. To enter Mode Group Selection/programming, tap the switch about 20+ times or until there is no light coming from the flashlight. Release the switch and wait till you see the first blink + flashing. Now you have 2 options:
A. Tap the switch to enter Mode Group Selection and the light will blink as described in c. below.
B. Full click the switch to the turn the light off and verify which Mode Group you want, then turn the light back on to enter Mode Group Selection.
a. Tap/Half Click the switch until it stops advancing through the modes (no light is emitted) to enter mode group configuration mode.
b. Tap/Half-click again after a single flash followed by rapid strobing to enable mode group selection.
c. The light will flash to show which Mode Group you are in. Example: 1 flash = Mode Group 1. 2 flashes = Mode Group 2. 10 flashes = Mode Group 10.
d. After the light reaches the desired mode group and the flashing for that mode has ended, switch the light off and then back on. You should be in your desired mode group.
2. Mode Group Description (12 groups):
1. Mode Group 1: 1 Flash, then click to select. (0.1%, 1%, 10%, 35%, 100%, strobe, biking, battery-check)
2. Mode Group 2: 2 Flashes, then click to select. (0.1%, 1%, 10%, 35%, 100%)
3. Mode Group 3: 3 Flashes, then click to select. (100%, 35%, 10%, 1%, 0.1%)
4. Mode Group 4: 4 Flashes, then click to select. (1%, 20%, 100%, strobe, biking, battery-check, SOS)
5. Mode Group 5: 5 Flashes, then click to select. (1%, 20%, 100%)
6. Mode Group 6: 6 Flashes, then click to select (100%, 20%, 1%)
7. Mode Group 7: 7 Flashes, then click to select (0.1%, 1%, 10%, 50%, strobe, biking, battery-check, SOS)
8. Mode Group 8: 8 Flashes, then click to select (0.1%, 1%, 10%, 50%)
9. Mode Group 9: 9 Flashes, then click to select: (50%, 10%, 1%, 0.1%)
10. Mode Group 10: 10 Flashes, then click to select (1%, 10%, 35%, 100%)
11. Mode Group 11: 11 Flashes, then click to select (100%, 20%, strobe)
12. Mode Group 12: 12 Flashes, then click to select (100% only)
3. To activate or deactivate memory mode, do the following:
a. Switch the light on.
b. Tap/half-click the switch at least 20 times to enter mode group configuration mode.
c. Wait until the light flashes 2 times.
d. Click the switch.
e. Follow the same steps to change back.
[ITEMPRICE]