Convoy S2+ Titanium EDC LED Flashlight, Nichia 519A R9080 LED, 90 CRI, 5000K CCT, 1240 Lumens, 12 Mode Groups With Up To 8 Modes Per Group
Description
The Convoy S2+Titanium is a high quality, compact, versatile, and durable EDC and general-purpose LED flashlight.
The Titanium alloy body gives the S2+ Titanium a classy and high tech appearance. It is available in a bright finish or a stonewash finish.
The S2+ Titanium with the 519A R9050 90 CRI 5000K LED and an orange peel reflector has a floody beam that provides lots of short range (up to 200 meters) illumination.
With 12 programmable Mode Groups and up to 8 modes per group, plus stepped or stepless ramping modes, plus Strobe and Tactical modes, this is the perfect flashlight for all your flashlight needs.
The S2+ is great for your EDC kit, car glove box, your workshop, or around the house. It works great as part of a survival kit, and for all outdoor uses.
Features
· Floody, High CRI Nichia 519A LED with up to 1240 lumens
· 12 Mode Groups
· Up To 8 Modes per Mode Group (Depending on Selected Mode Group)
· Stepped or Stepless Ramping
· Bright or Stonewash Finish
· “Clicky” Mechanical Tail Switch
· Last Mode Memory for All Modes
· Reverse polarity protection
· Temperature Control Protection
· Low Voltage Protection
· Voltage Check Mode
· Tail Stand
Specifications
· Nichia 519A R9080 90 CRI LED with 5000K CCT
· Orange peel reflector for lots of floody illumination
· Throw of up to 200 meters
· Anti-Reflective Glass Lens
· Titanium alloy body
· IPX4 Waterproof Rating
· Requires a flat-top unprotected rechargeable 18650 battery
· 5 Amp Linear Driver Output
· Length: 4.63 inches
· Head Diameter: .95 inches
· Body Diameter: .95 inches
· Weight: 4 ounces with 18650 battery
Package Contents
· S2+ Titanium Flashlight
· Pocket Clip
· Lanyard
· 1 Bay 18650 Battery Charger
· Optional Convoy S2+ Sheath/Holster
Convoy S2+ 12 Mode Group Operating Instructions
1. To Turn On: Full click the tail switch. The flashlight turns on at the last brightness level used. This includes all normal and special modes including Strobe, Biking and Battery Check. So if you want to have your M21B turn on in Strobe mode, turn it off when in Strobe mode.
2. To Turn Off: Full click the tail switch.
3. To Advance Through Modes: Half click the switch until you reach the desired mode. The M21B switch only works in one direction.
4. Physical Flashlight Lockout: Untwist the flashlight base to break battery circuit.
Mode Group Configuration
1. To enter Mode Group Selection/programming, tap the switch about 20+ times until there is no light coming from the flashlight. Release the switch and wait till you see the first blink + flashing. Now you have 2 options:
A. Tap the switch to enter Mode Group Selection and the light will blink as described in c. below.
B. Full click the switch to the turn the light off and verify which Mode Group you want, then turn the light back on to enter Mode Group Selection.
a. Tap/Half Click the switch until it stops advancing through the modes (no light is emitted) to enter mode group configuration mode.
b. Tap/Half-click again after a single flash followed by rapid strobing to enable mode group selection.
c. The light will flash to indicate which Mode Group you are in. Example: 1 flash = Mode Group 1. 2 flashes = Mode Group 2. 10 flashes = Mode Group 10.
d. After the light reaches the desired mode group and the flashing for that mode has ended, switch the light off and then back on. You should be in your desired mode group.
2. Mode Group Description (12 groups):
A. Mode Group 1: 1 Flash, then click to select. (0.1%, 1%, 10%, 35%, 100%, strobe, biking, battery-check)
B. Mode Group 2: 2 Flashes, then click to select. (0.1%, 1%, 10%, 35%, 100%)
C. Mode Group 3: 3 Flashes, then click to select. (100%, 35%, 10%, 1%, 0.1%)
D. Mode Group 4: 4 Flashes, then click to select. (1%, 20%, 100%, strobe, biking, battery-check, SOS)
E. Mode Group 5: 5 Flashes, then click to select. (1%, 20%, 100%)
F. Mode Group 6: 6 Flashes, then click to select (100%, 20%, 1%)
G. Mode Group 7: 7 Flashes, then click to select (0.1%, 1%, 10%, 50%, strobe, biking, battery-check, SOS)
H. Mode Group 8: 8 Flashes, then click to select (0.1%, 1%, 10%, 50%)
I. Mode Group 9: 9 Flashes, then click to select: (50%, 10%, 1%, 0.1%)
J. Mode Group 10: 10 Flashes, then click to select (1%, 10%, 35%, 100%)
K. Mode Group 11: 11 Flashes, then click to select (100%, 20%, strobe)
L. Mode Group 12: 12 Flashes, then click to select (100% only)
3. To activate or deactivate memory mode, do the following:
a. Switch the light on.
b. Tap/half-click the switch at least 20 times to enter mode group configuration mode.
c. Wait until the light flashes 2 times.
d. Click the switch.
e. Follow the same steps to change back.
Return Policy.
I do accept returns but only if the item is defective. I do NOT accept remorse returns or returns because you do not know how to operate the item.
Before making a purchase, or opening a return request, please contact me with any questions you may have and/or describe the issue in as much detail as you can. It may be a simple fix that I can quickly troubleshoot for you. It will normally take less than 1 day after you contact me for me to reply to your questions or give you some troubleshooting suggestions.
If that does not resolve the problem, then would be the time to open a return request.
If you return an item saying it is defective, I will thoroughly test the item upon receipt. If, after testing, it is truly defective, I will issue your full refund right away. If the testing shows the item is NOT defective, I will deduct a $10.00 restocking fee from your refund.
I am implementing this policy because recently I have had several items returned because of buyer’s remorse and/or because the buyer did not know how to configure or use the item they purchased.
I believe in the Golden Rule which says treat others the way you want to be treated, and my return policy reflects that belief and also protects me from frivolous and fraudulent returns.
Thank you for your understanding and cooperation and as always, please contact me before requesting a return or leaving a negative review and give me the chance to resolve the problem first.