Convoy S21G Titanium LED Flashlight, SFT40 5000K CCT,
2000 Lumens, 12 Mode Groups, Up To 8 Modes Per Group
Description
The Convoy S21G Titanium LED flashlight is a compact,
lightweight, versatile, durable, and powerful flashlight. With 2 different
finishes, Glossy and Stonewash, the S21G looks very classy.
Designed for EDC kits, it is also a very competent
multi-purpose flashlight suitable for indoor and outdoor use.
The SFT40 5000K CCT LED emits up to 2000 lumens and has
great throw, over 500 meters, plus has a
large spill area for plenty of floody light.
The 12 Mode Groups, with up to 8 modes per group,
gives you plenty of options for customizing your S21G to your needs and
situation.
The S21G requires a flat top, unprotected 21700
rechargeable Lithium-Ion battery (included). The 21700 battery gives the S21G
plenty of long lasting power.
Features
· Glossy or
Stonewash Titanium Body
· Luminus
SFT40 LED
· 5000K
Neutral White Light
· Up To 2000
Lumens
· Smooth
reflector for more throw
· Anti-reflective
(AR) Glass Lens
· 12 Customizable
Mode Groups
· Up To 8
Modes per Mode Group
· Requires a
flat top, unprotected, 21700 Rechargeable Battery (included, battery brand may vary)
· IPX6 Waterproof
Rating
· Mechanical
Tail Switch – single click to turn light on. Half-click to cycle through the
lighting modes.
· Last Mode
Used Memory
· Reverse
Polarity Protection
· Battery Voltage
Check Mode
· Temperature
Control Protection
· Low
Voltage Protection
· Tail Stand
Specifications
· Luminus SFT40
LED
· 5000K CCT
(Corelated Color Temperature)
· Throw
Distance Over 500 Meters
· Titanium Alloy
Body
· Weighs 4.4
ounces without battery and only 6.8 ounces with a 21700 battery.
· 6 Amp
Linear Driver
· Length: 4.99
Inches
· Body
Diameter: 1 Inch
· Head and
Tail Diameter: 1.1 Inch
Package Contents
· S21G
Titanium Flashlight
· 21700 Rechargeable Battery
· Lanyard
· 1 Bay
Battery Charger
Convoy 12 Mode Group Operating Instructions
1. To Turn On: Full click
the tail switch. The flashlight turns on at the last brightness level used.
This includes all normal and special modes including Strobe, Biking and Battery
Check.
2. To Turn Off: Full click the tail switch.
3. To
Advance Through Modes: Half click the switch until you reach the desired mode.
The T3 switch only works in one direction.
4. Default Mode Group: (Group 1) modes are: 0.1%,
1%, 10%, 35%, 100%, strobe, biking, battery-check)
5.
Physical Flashlight Lockout: Untwist the flashlight base ¼ turn to break
battery circuit.
Mode Group Configuration
1. To enter Mode Group
Selection/programming, tap the switch
about 20+ times until there is no light coming from the flashlight. Release the
switch and wait till you see the first blink + flashing. Now you have 2
options:
A. Tap the switch to enter Mode Group Selection and the light will blink as described in c. below.
B.
Full click the switch to the turn the light off
and verify which Mode Group you want, then turn the light back on to enter Mode
Group Selection.
a. Tap/Half Click the switch until it
stops advancing through the modes (no light is emitted) to enter mode group
configuration mode.
b. Tap/Half-click again after a single
flash followed by rapid strobing to enable mode group selection.
c. The light will flash to indicate
which Mode Group you are in. Example: 1 flash=Mode Group 1, 2 flashes=Mode
Group 2, 10 flashes = Mode Group 10.
d. After
the light reaches the desired mode group and the flashing for that mode has
ended, switch the light off and then back on. You should be in your desired
mode group.
2. Mode Group Description (12
groups):
A. Mode Group 1: 1 Flash, then click to
select. (Mode group 1 (1%, 10%, 30%?100%)
B. Mode Group 2: 2 Flashes, then click to
select (1% 10%?35%?100%?strobe, biking, battery check)
C. Mode Group 3: 3 Flashes, then click to
select. (100%, 35%, 10%, 1%)
D. Mode Group 4: 4 Flashes, then click to
select. (1%, 20%, 100%, strobe, biking, battery-check)
E. Mode
Group 5: 5 Flashes, then click to select. (1%, 20%, 100%)
F. Mode
Group 6: 6 Flashes, then click to select (100%, 20%, 1%)
G. Mode Group 7: 7 Flashes, then click to
select (1%, 10%, 50%, strobe, biking, battery-check)
H. Mode
Group 8: 8 Flashes, then click to select (1%, 10%, 50%)
I. Mode Group
9: 9 Flashes, then click to select: (50%, 10%, 1%)
J. Mode
Group 10: 10 Flashes, then click to select (20%, 100%)
K. Mode Group 11: 11 Flashes, then click to
select (100%, 20%, strobe)
L. Mode
Group 12: 12 Flashes, then click to select (100% only)
3. To
activate or deactivate memory mode, do the following:
a. Switch the light on.
b.
Tap/half-click the switch at least 20 times to enter mode group configuration
mode.
c. Wait
until the light flashes 2 times.
d. Click
the switch.
e. Follow
the same steps to change back.
[ITEMPRICE]