Convoy T3 Titanium EDC
LED Flashlight, Nichia 519A R9080 95 CRI 5000K
12 Mode Groups with
Up To 8 Modes Per Group
Description
The Convoy T3 Titanium
MAO is a quality, compact, versatile, and durable EDC and general-purpose LED
flashlight.
The T3 Titanium features
a 519A R9080 95 CRI 5000K LED and an orange peel reflector to create a floody
beam that provides lots of short range (up to 50 meters) illumination.
With 12
programmable Mode Groups and up to 8 modes per group, plus stepped or stepless ramping
modes, plus Strobe and Tactical modes, this is the perfect flashlight for all
your flashlight needs.
The T3 is
multi-fuel so you can use regular AA, rechargeable alkaline AA batteries, or
rechargeable 14500 Lithium-Ion batteries.
Another great
feature of the T3 is that you have your choice of Titanium finish: stonewash or bright.
The T3 Titanium is
great for your EDC kit, car glove box, your workshop, or around the house. It
works great as part of a survival kit, and for all outdoor uses.
Features
· High CRI Nichia
519A LED with up to 500 lumens
· 12 Mode
Groups
· Up To 8
Modes per Mode Group (Depending on Selected Mode Group)
· Mode Group
1 is the default mode: 1%-10%-40%-100% + Strobe
· Reverse
Click Mechanical Control Switch
· Last Mode
Memory for All Modes
· Reverse
polarity protection
· Temperature
Control Protection
· Low
Voltage Protection
· Voltage
Check Mode
· Tail Stand
Specifications
· Nichia
519A R9080 LED with 95 CRI
· 5000K Neutral
White Color Temperature
· Orange peel
reflector for a floody beam
· Throw of
up to 50 meters
· Titanium
alloy body
· IPX4
Waterproof Rating
· Uses 1 AA,
Rechargeable Alkaline AA, or 14500 Lithium-ion battery
· Length: 3.75
inches
· Head Diameter:
.85 inches
· Body
Diameter: .85 inches
· Weight: 3.8
ounces with battery
Package Contents
· T3 Titanium
Flashlight
· Rechargeable
14500 Battery
· Lanyard
· 1 Bay 14500
Battery Charger
· Optional
Convoy T3 Titanium Ballistic Nylon Sheath/Holster
Convoy T3 Titanium 12 Mode Group Operating Instructions
1. To Turn On: Full click
the tail switch. The flashlight turns on at the last brightness level used.
This includes all normal and special modes including Strobe, Biking and Battery
Check.
2. To Turn Off: Full click the tail switch.
3. To
Advance Through Modes: Half click the switch until you reach the desired mode.
The T3 switch only works in one direction.
4. Default Mode Group: (Group 1) modes are: 0.1%,
1%, 10%, 35%, 100%, strobe, biking, battery-check)
5.
Physical Flashlight Lockout: Untwist the flashlight base to break battery
circuit.
Mode Group Configuration
1. To enter Mode Group
Selection/programming, tap the switch about 20+ times until there is no light
coming from the flashlight. Release the switch and wait until you see the first
blink + flashing. Now you have 2 options:
A. Tap the switch to
enter Mode Group Selection and the light will blink as described in c. below.
B. Full click the
switch to the turn the light off and verify which Mode Group you want, then turn
the light back on to enter Mode Group Selection.
a. Tap/Half Click the switch until it
stops advancing through the modes (no light is emitted) to enter mode group
configuration mode.
b. Tap/Half-click again after a single
flash followed by rapid strobing to enable mode group selection.
c. The light will flash to indicate
which Mode Group you are in. Example: 1 flash = Mode Group 1. 2 flashes = Mode Group
2. 10 flashes = Mode Group 10.
d. After
the light reaches the desired mode group and the flashing for that mode has
ended, switch the light off and then back on. You should be in your desired
mode group.
2. Mode Group Description (12
groups):
A. Mode Group 1: 1 Flash, then click to
select. (Mode group 1 (1%?10%, 30%?100%)
B. Mode Group 2: 2 Flashes, then click to
select (1% 10%?35%?100%?strobe, biking, battery check)
C. Mode Group 3: 3 Flashes, then click to
select. (100%, 35%, 10%, 1%)
D. Mode Group 4: 4 Flashes, then click to
select. (1%, 20%, 100%, strobe, biking, battery-check)
E. Mode Group 5: 5 Flashes, then click to
select. (1%, 20%, 100%)
F. Mode Group 6: 6 Flashes, then click to
select (100%, 20%, 1%)
G. Mode Group 7: 7 Flashes, then click to
select (1%, 10%, 50%, strobe, biking, battery-check)
H. Mode Group 8: 8 Flashes, then click to
select (1%, 10%, 50%)
I. Mode Group 9: 9 Flashes, then click to
select: (50%, 10%, 1%)
J. Mode Group 10: 10 Flashes, then click to
select (20%, 100%)
K. Mode Group 11: 11 Flashes, then click to
select (100%, 20%, strobe)
L. Mode Group 12: 12 Flashes, then click to
select (100% only)
3. To
activate or deactivate memory mode, do the following:
a. Switch the light on.
b. Tap/half-click
the switch at least 20 times to enter mode group configuration mode.
c. Wait
until the light flashes 2 times.
d. Click
the switch.
e. Follow
the same steps to change back.
[ITEMPRICE]