Sofirn IF19 Mini EDC LED, Flashlight, 2000 Lumens, SST40 LED, TIR
Optics, USB C Charging, 18350 Battery, 461 Meters Throw
Description
The Sofirn IF19 is the little brother to
the classic IF22A and has the same classic design as the IF22A, except smaller
to make it a better EDC flashlight.
The IF19 has great runtimes and at the
max brightness of 2000 lumens, it will run continuously for 45 minutes. With a
tight, bright hot spot and large spill area, the IF19 is an excellent EDC and
multi-purpose flashlight.
The IF19 is great for EDC kits, survival
kits, hiking, camping, backpacking, fishing or just to keep in your glovebox,
tool kit or on your bedstand.
With the powerful Luminus SST40 LED, a
Total Internal Reflection (TIR) lens, a throw of up to 461 meters, a simple
user interface, 5 lighting modes, 1 - 2000 lumens output, and convenient pocket
size, the IF19 is a very versatile and useful flashlight.
At only 3.35 inches long and weighing only
2.65 ounces, it will easily fit in pants pockets, purses, EDC kits, survival
kits, in your toolbox, glove box or drawer.
Features
·
Luminus SST40 LED
·
Up To 2000 Lumens
·
Up To 461 Meters Throw
·
TIR Reflector/Lens
·
Compact and lightweight
·
USB-C Charging Port
·
Battery Status/Charging LED on Switch
·
Electronic Side Switch
·
Mode Memory: Last mode used is memorized
(Low, Med, High Modes)
·
Reverse polarity protection: Protects
from improper battery insertion
·
Low battery level warning: When the
battery voltage drops below 3.0V, the LED indicator in the side switch will
flash red indicating the battery needs to be recharged.
·
Low voltage protection: The flashlight
brightness steps down automatically when the voltage is lower than 3.0V. It
also turns off automatically if the voltage gets too low. Recharge the battery.
·
Advanced Temperature Regulation (ATR)
technology: If the temperature rises above 55?, the IF19 is programmed to
automatically step down the brightness to prevent over-heating.
Specifications
·
SST40 LED
·
3° TIR lens
·
Up To 2000 Lumens
·
6000 – 65000K Correlated Color
Temperature (CCT)
·
Black aerospace grade 6061 grade aluminum
alloy body
·
2.8V—4.2V Operating voltage
·
Uses an 18350 rechargeable lithium-ion
battery (included)
·
IP68 Waterproof Rating (up to 2 meters
underwater)
·
3.35 Inches Long
·
1.57 Inches Head Diameter
·
Weighs 3.5 Ounce With 18650 Battery
Operating Instructions
1. Ramping
or Smooth Ramping Mode: Single click the switch to turn the light ON or OFF.
2. To
Change Brightness Level in Ramping Mode: With the flashlight on, press and hold
the switch and it will, starting from the remembered brightness level, continuously
cycle through Low, Medium, and High. The modes selected when the switch has
been released. (Please note: Moon, Turbo and Strobe are not in the automatic
cycle).
3. To
Change Brightness in Smooth Ramping Mode: Hold and press the switch to change
brightness steplessly. Ramping changes its direction when the switch is pressed
again within 1.5 seconds. The LED flashes once when it reaches the lower or
upper end of the ramp.
4. Either
Mode/Group Operations:
a. TURBO
AND RETURN: In any setting, double click on the switch to enter Turbo mode,
single click again to return.
b. STROBE
AND RETURN: when the flashlight is on non-lockout mode, triple click on the
switch to enter Strobe mode, single click again to return.
c. LOCK/UNLOCK:
When the flashlight is off, 4 fast clicks to lock the flashlight. LED blinks
twice to signal that the light is in lock mode. Fast two, three or four clicks
on the switch to unlock it returning to previously used mode. You can only use moonlight by holding the
switch while being locked. LED will flash twice to indicate the flashlight is
in lock mode when you try other operations.
d. MOONLIGHT MODE: When the
flashlight is off, hold the switch to enter Moonlight. Click the switch once to
turn off or hold the switch again to enter Low and cycle through the general
brightness settings.
e. TO SWITCH BETWEEN
DIFFERENT GROUPS While the flashlight is on, fast four clicks to switch between
group 1 and group 2. LED blinks twice to signal that the group switch is
completed.
f. STANDBY LOCK/UNLOCK: When
the flashlight turns off after 1 minute, it will automatically enter lockout
mode. Fast two, three or four clicks on the switch to unlock it returning to
previously used mode. You can only use moonlight by holding the switch while
being locked. The LED will flash twice to indicate the flashlight is in lockout
mode when you try other operations.